Phần mềm prtg network monitor full crack

With the System Information feature, you can see what is going on in the systems that you have in your network. To see the system information for a device, click the device"s System Information tab.

You watching: Phần mềm prtg network monitor full crack


*

System Information Tab on a Windows Device


The system information shows

basic system data of your device lượt thích the BIOS serial number or MAC & IPhường addresses,all connected hardware types & their properties,the software you have installed, including version & vendor information,the users that are connected to your system & their domains,a danh sách of all active sầu or stopped Windows system services including their properties, anda danh mục of all processes that are running on your system, including their ID và start time.

System information is available for all devices that run with an officially supported Windows operating system. You can also retrieve sầu system information from devices that run with Linux or Unix, & from all other devices that have the Simple Network Management Protocol (SNMP) enabled.

*
You cannot use this feature on the hosted probe of a PRTG Hosted Monitor instance. You can use this feature on remote probes.

Prerequisites

You already meet the main prerequisites for retrieving system information if you already monitor a device with sensors that use Windows Management Instrumentation (WMI) or the Simple Network Management Protocol (SNMP). PRTG automatically displays the data on the respective device"s System Information tab. To retrieve all available system information, enable both WXiaoMI và SNMP. on the device.

The System Information feature is enabled by default. To retrieve sầu the data, PRTG automatically uses the credentials for Windows systems và the credentials for SNMP devices that you entered in the device settings or that the device inherits from a parent object lượt thích the root group. Consider this when you monitor devices that are outside of your local network, especially when you use SNMP.. v1 or SNMP v2c, which vị not provide encryption.

Meet the following prerequisites if you vì chưng not yet use WXiaoMi MI or SNMP sensors:


Option

Description

Valid credentials

Specify valid credentials for Windows systems và for SNMP. devices in the device settings.

Remote Registry Windows service

Enable the Remote Registry service on the target computer, for example, via services.msc, và phối the Startup Type lớn Automatic.

Remote Procedure hotline (RPC) Windows service

Enable the RPC Windows service on the target computer, for example, via services.msc, và mix the Startup Type khổng lồ Automatic.

WMI

Enable WXiaoMI on both the probe system and the target system. In particular, configure the firewall of the target system to lớn allow WXiaoMi MI.

For more information, see section Monitoring via WXiaoMi MI & the Knowledge Base: My WMI sensors don"t work. What can I do?.

SNMP

Enable SNMPhường. on the target system. PRTG automatically uses the SNMPhường. Compatibility Options as defined in the device settings or as inherited from a parent object lượt thích the root group.

For more information, see section Monitoring via SNMPhường & the Knowledge Base: My SNMP sensors don’t work. What can I do?.


It is not necessary to meet every single prerequisite but then some tables bởi vì not show all data or they can even remain empty. For example, if you do not enable SNMP on the target device, you get less information for the System table.

The first data usually comes in after a few minutes. If PRTG cannot retrieve sầu some data, for example, because of a misconfiguration, the respective System Information table shows an error message.For more information, see the Knowledge Base: How can PRTG get data for System Information tables?

System information for your devices is only for informational purposes. We cannot guarantee that the data displayed in PRTG fully corresponds to the device parameters.


*

Error Messages: No Data Available


System Information (Device Tab)

Probe, group, device, & sensor pages have sầu tabs that you can use khổng lồ navigate between the different options. For example, you can view your network"s status, view monitoring results, or change settings.


*

Tabs Bar for Devices


Select a device & clichồng the System Information tab.

See more: Download Foxit Phantompdf Business 8, Foxit Reader 8

The System Information feature is enabled by mặc định. If you vị not see the System Information tab, you need to lớn enable System Information in the device settings under Advanced Network Analysis. You can also inherit the setting from an object that is higher in the object hierarchy.


*

Advanced Network Analysis


Analyze Your Systems

On the System Information tab, PRTG displays a table for each system information category for the device.


Category

System Information

Request Method (WXiaoMI or SNMP)

System

Shows system data of the device like the BIOS serial number, IPhường addresses, MAC addresses, & the Windows version.

WXiaoMI và SNMP

Hardware

Shows hardware that is connected lớn the device like disk drives, CD/DVD, đoạn Clip controllers, processors, network adapters, sound devices, printers, và memory. You can see the Class & the Caption of a hardware device. In the Properties column, you get more information about the hardware, for example, the mô tả tìm kiếm.

WXiaoMI & SNMP

Software

Shows the installed software & the Version number of the device. In the Properties column, you get more information about the software, for example, the size.

PRTG uses Uninstall registry keys to retrieve sầu the danh mục of installed software, so the displayed software might differ from the software that the target Windows system shows under Programs & Features.

The System Information scan for software on the probe device uses the credentials of the probe system and ignores credentials that you specified on the Settings tab.

WXiaoMi MI and SNMP

Users

Shows the user accounts that are connected to lớn the device và their Domain.

WMI

Services

Shows the available Windows services on the device. You can see the State of the service (running, stopped) & the start type (Startup Type automatic, manual, or disabled). In the Properties column, you can get more information about a service, for example, the mô tả tìm kiếm.

WMI

Processes

Shows the processes that are running on the device as listed on the Processes tab of the Windows Task Manager. You can also see the Start Time (only WMI) and Process ID of a process.

WXiaoMi MI và SNMP


You can sort each table danh sách via the column headers.

Cliông xã

*
in the upper-right corner of a table to lớn retrieve sầu new information for this System Information category. The time stamp shows the time that has passed since the last table refresh.


*

Table Refresh


PRTG automatically retrieves data for the tables System, Hardware, và Software once every 24 hours. The tables Users, Services, & Processes refresh each time you open the System Information tab. PRTG also updates all system information tables when the PRTG core hệ thống is restarted, for example, after an update.

PRTG can perform up to 24 system information scans at the same time, so it can take some time until you see data in the tables after a hệ thống restart.

Data Storage

PRTG stores data files with the retrieved system information in the corresponding System Information Database subfolders of the PRTG data directory.

See more: Link Tải Cimcoedit 8 Full - Hướng Dẫn Cài Cimcedit V8 Full

If you delete a device, the system information files of this device remain in these subfolders unless you manually delete them.